Basic Electronics - Special Purpose Diodes

-
There are few diodes which are designed to serve some special purposes. There are many of such kinds like Transient voltage suppression diodes, Gold doped diodes, Super barrier diodes, Point contact diodes, Peltier diodes etc. But other than these, there are few prominent diodes, which have got many applications. Let us go through them.

Varactor Diode

A junction diode has two potentials on both sides where the depletion region can act as a dielectric. Hence there exists a capacitance. The Varactor diode is a special case diode that is operated in reverse bias, where the junction capacitance is varied.
The Varactor diode is also called as Vari Cap or Volt Cap. The following figure shows a Varactor diode connected in reverse bias.
Varactor Diode
If the reverse voltage applied is increased, the width of the dielectric region increases, which reduces the junction capacitance. When the reverse voltage decreases, the width of the dielectric decreases, which increases the capacitance. If this reverse voltage is completely null, then the capacitancewill be at its maximum.
Capacitance Voltage
The following figure shows various symbols used for Varactor diode which represents its function.
Varactor Diode Symbol
Though all diodes have this junction capacitance, the Varactor diode is mainly manufactured to make use of this effect and increase the variations in this junction capacitance.
Practical Varactor Diode

Applications of Varactor diode

This diode has many applications such as −
  • It is used as a Voltage variable capacitor.
  • It is used in variable LC tank circuit.
  • Used as Automatic frequency control.
  • Used as Frequency Modulator.
  • Used as RF Phase shifter.
  • Used as frequency multiplier in local oscillator circuits.

Tunnel diode

If the impurity concentration of a normal PN junction is highly increased, this Tunnel diode is formed. It is also known as Esaki diode, after its inventor.
When the impurity concentration in a diode increases, the width of depletion region decreases, extending some extra force to the charge carriers to cross the junction. When this concentration is further increased, due to less width of the depletion region and the increased energy of the charge carriers, they penetrate through the potential barrier, instead of climbing over it. This penetration can be understood as Tunneling and hence the name, Tunnel diode.
Tunnel Diode
The Tunnel diodes are low power devices and should be handled with care as they easily get affected by heat and static electricity. The Tunnel diode has specific V-I characteristics which explain their working. Let us have a look at the graph below.
VI Tunnel Diode
Consider the diode is in forward-biased condition. As forward voltage increases, the current increases rapidly and it increases until a peak point, called as Peak Current, denoted by IP. The voltage at this point is called as Peak Voltage, denoted by VP. This point is indicated by A in the above graph.
If the voltage is further increased beyond VP, then the current starts decreasing. It decreases until a point, called as Valley Current, denoted by IV. The voltage at this point is called as Valley Voltage, denoted by VV. This point is indicated by B in the above graph.
If the voltage is increased further, the current increases as in a normal diode. For larger values of forward voltage, the current increases further beyond.
If we consider the diode is in reverse-biased condition, then the diode acts as an excellent conductor as the reverse voltage increases. The diode here acts as in a negative resistance region.

Applications of Tunnel diode

There are many applications for tunnel diode such as −
  • Used as a high-Speed Switching device
  • Used as a memory storage device
  • Used in Microwave oscillators
  • Used in relaxation oscillators

Schottky Diode

This is a special type of diode in which a PN junction is replaced by a metal semiconductor junction. The P-type semiconductor in a normal PN junction diode is replaced by a metal and N-type material is joined to the metal. This combination has no depletion region between them. The following figure shows the Schottky diode and its symbol.
Schottky Diode
The metal used in this Schottky diode may be gold, silver, platinum or tungsten etc. As well, for the semiconductor material other than silicon, gallium arsenide is mostly used.
Image Schottky Diode

Operation

When no voltage is applied or when the circuit is unbiased, the electrons in the N-type material has lower energy level than the ones in the metal. If the diode is then forward biased, these electrons in the N-type gain some energy and move with some higher energy. Hence these electrons are called as Hot Carriers.
The following figure shows a Schottky diode connected in a circuit.
Operation

Advantages

There are many advantages of Schottky diode such as −
  • It is a unipolar device and hence no reverse currents are formed.
  • Its forward resistance is low.
  • Voltage drops are very low.
  • Rectification is fast and easy with the Schottky diode.
  • There is no depletion region present and hence, no junction capacitance. So, the diode gets to OFF position quickly.

Applications

There are many applications of Schottky diode such as −
  • Used as a detector diode
  • Used as a Power rectifier
  • Used in RF mixer circuits
  • Used in power circuits
  • Used as clamping diodes

Comments

Post a Comment

Popular posts from this blog

Basic Electronics - Types of Transformers

-
Image
Coming to the classification of transformers, there are many types depending upon the core used, windings used, place and type of usage, voltage levels etc. Single and three phase transformers According to the supply used, the transformers are mainly classified as  Single phase  and  three phase  transformers. A normal transformer is a single phase transformer. It has a primary and a secondary winding and it is operated to either decrease or increase the secondary voltage. For a three phase transformer, three primary windings are connected together and three secondary windings are connected together. A single three phase transformer is preferred to three single phase transformers so as to get good efficiency, where it occupies less space at low cost. But due to the transportation problem of heavy equipment, single phase transformers are used in most cases. Another classification of these transformers is  Core  and  Shell  type. ...
Read more

Basic Electronics - MOSFET

-
Image
FETs have a few disadvantages like high drain resistance, moderate input impedance and slower operation. To overcome these disadvantages, the MOSFET which is an advanced FET is invented. MOSFET stands for Metal Oxide Silicon Field Effect Transistor or Metal Oxide Semiconductor Field Effect Transistor. This is also called as IGFET meaning Insulated Gate Field Effect Transistor. The FET is operated in both depletion and enhancement modes of operation. The following figure shows how a practical MOSFET looks like. Construction of a MOSFET The construction of a MOSFET is a bit similar to the FET. An oxide layer is deposited on the substrate to which the gate terminal is connected. This oxide layer acts as an insulator (sio 2  insulates from the substrate), and hence the MOSFET has another name as IGFET. In the construction of MOSFET, a lightly doped substrate, is diffused with a heavily doped region. Depending upon the substrate used, they are called as  P-type  and...
Read more

’பிக் பாஸ் 2’ - நாள் மூன்று: வெங்காயப் பஞ்சாயத்து

-
Image
2 நாட்களாக சப்பென்று சென்று கொண்டிருந்த ’பிக் பாஸ் 2’ நேற்றுதான் சற்று சூடு பிடிக்கத் தொடங்கியது என்று கூறலாம். ஒரு வெங்காயத்துக்கு இவ்ளோ பெரிய பஞ்சாயத்தா என்று எண்ணுமளவுக்கு காய்ச்சி விட்டார்கள் மும்தாஜும் நித்யாவும். காலையில் ’சொடக்கு மேல சொடக்கு போடுது’ பாடல் ஒலிக்க ஆரம்பித்ததும் மமதி, பாலாஜி உள்ளிட்ட சிலர் உட்கார்ந்தபடியே தூங்கி வழிய மற்றவர்கள் எழுந்து குத்தாட்டம் போடத் தொடங்கி விட்டனர் பொன்னம்பலம் உட்பட. பாடல் முடிந்ததும் ’நள்ளிரவில் மெயின் கதவு பூட்டப்பட்டு விட்டதால்’ தான் ஒன் பாத்ரூம் போக சிரமப்பட்டு குப்பைக்கூடையைத் தூக்கிக்கொண்டு ஓடியதையும் கலகலப்பாக சொல்லி முடித்தார் பொன்னம்பலம். ஆட்டத்திலும், கேமராவைப் பார்த்து பேசுவதிலும், கேமராவைக் காதலிப்பதாகச் சொல்வதிலும் ஓவியாவை நகலெடுக்க முயற்சித்தார் ஐஸ்வர்யா. ஃபீலா பீலா என்பதுதான் நேற்றைய லக்ஸரி பட்ஜெட் டாஸ்க். அதாவது வீட்டில் இருப்பவர்கள் இரண்டு குழுவாகப் பிரிந்துகொள்ள வேண்டும். ஒரு குழு கதை சொல்ல வேண்டும். இன்னொரு குழு அந்தக் கதை உண்மையா? பொய்யா? என்று கண்டுபிடிக்க வேண்டும். இதுதான் டாஸ்க். இதைச் செய்து முடித்தா...
Read more